Processor / CPU:

520 Mhz Intel 32 Bit XScale RISC Processor
Color Graphics Touch Screen Display:

3.5 in. Sunlight Readable, Transflective TFT Color Graphics Display
320x240, 64,000 Color
Dimmable For Nighttime Use
Touch Screen For Ease Of Use
Wide Viewing Angle
Shift Lights:

Eight (8) Dual Color Red/Green Shift Lights
Sunlight Readable, Extremely Bright
Dimmable For Nighttime Use
User Programmable Limits And Scale
Firmware And Functionality:

Multiple Screens Display Tach & Engine Vitals
With User Programmable Limits And Alarms
Pop-Up Lap Timer With Best/Last Lap Displays
Calibration/Sensor And User Preference Screens
On-Unit Replay Screen Of Any Logged Track Session
File Management Supports Multiple Track Sessions
Display Any Sensor(s) On User Configured Screens
Flexible On-Screen User Configurable Data Logging
Easy To Update/Upgrade Software In The Field
Complete With Easy To Use Back-Up Utility
Data Logging:

The K-Pod comes with two (2) Gigabytes of standard on-board memory to store dozens and dozens of tracks sessions. That could be an entire racing season logged on your K-Pod units without writing over any existing file! All engine vitals as well as all other inputs can be logged. Each input channel can be logged at any of the selectable sample rates. The K-Pod automatically over samples by four times and averages the data to get extremely accurate results. This feature guarantees that your data is more accurate than any other system on the market. The CAN data as well as the GPS data is logged.
Two (2) Gigabytes Standard Data Storage Memory (Factory Expandable)
Data 4x Over Sampled And Averaged For Accuracy
Data Sampled Up To 400 Hz Per Channel
Data Logged Up To 100 Hz Per Channel
Programmable Auto Start/Stop Logging Features
Data From CAN Bus Logged
Data From GPS Serial Port Logged
Data From Synchronized Video Serial Port Logged
Stores Dozens Of Track Sessions With Out the Need To Up Load Data
Auto Time Stamp Of Each Logged Track Session
Upload To PC Via USB Client 1 Mega Bits Per Second
Upload To USB Host FLASH Drive 10 Mega Bits Per Second
Analog Inputs (Logged):

Six (6) Total Analog Inputs (4 Internal)
High Accuracy 10-Bit High Speed Analog To Digital Converters (A to D)
Two (2) Single Ended A To D Channels To Connect To External Sensors
One (1) Internal Single Ended Channels Dedicated For Monitoring Battery Volatage
Data From Onboard 3-Axis G-Force Sensor Logged (10Hz for each channel, Range: +-6G, Resolution: 12-bit)
Additional Channels Can Be Added By Adding One Or More DACX
The K- Pod comes with two (2) external analog inputs for connecting to external sensors. Additonal analog and digital channels or OBD-II connectivity can instantly be added to the K-Pod by connecting one of the data acquistion channel expanders (DACX).
|