DACX-EGT
DACX-EGT-2 - $599.00, DACX-EGT-4 - $899.00, DACX-EGT-6 - $1,199.00,
DACX-EGT-8 - $1,499.00

Instantly add EGT sensors on any Chase Commander, Micro Pod, K-Pod, or Pro Series unit.

   The DACX-EGT (data acquisition channel expander module with EGT Probes) is a plug-n-play module that instantly adds 2, 4, 6, or 8 EGT sensors to your Chase Commander, Micro Pod, K-Pod, or Pro Series unit. Each analog input on the DACX-EGT already includes an EGT amplifier which connects directly to a K-Type probe. You can either order an EGT probe from RLC Racing or hook up to the K-Type EGT probe already in your car. The EGT probe from RLC Racing is a high quality K-Type probe that comes with mounting bungs. The probe features 6 ft of stainless steal over-braid wire for high temperature protection and can be ordered in custom lengths if required (shorter lengths only). The DACX-EGT plugs directly into the harness of the Chase Commander, Micro Pod Lite, Micro Pod Sport, Pro X, Pro S, or K-Pod to instantly expand the number of EGT sensors you can log. Each analog channel on the DACX-EGT is 72 inches long and has the connector attached at the end so you can quickly connect to a sensor. RLC offers custom DACX modules where the customer can specify the lengths. We can either shorten the channels or extend them (max 120 inches) for a fee of $100. RLC will attach all connectors. Note: If the customer wants to attach their own connectors the warranty may change, see terms and conditions for details.The DACX-EGT is a dedicated module which only adds EGT sensors.

If you are going to be adding analog sensors in addition to the EGT sensors, you may want to consider the standard DACX module. The DACX moudule allows you to add any type of analog sensor to your Chase Commander, Micro Pod, K-Pod, or Pro Series unit, including EGT sensors.

Four Models To Choose From:

Custom Lengths Available Upon Request

Complete Plug-N-Play EGT System
Amplifier Built-In For K-Type EGT Probes (K-Type EGT Probes Sold Separate)
Small, Rugged, Easy To Install
Add 2, 4, 6, or 8 EGT Probes/Sensors
Data 16 x Over Sampled And Averaged For Accuracy
Data Sampled Up To 1600 Hz Per Channel
Data Logged Up To 50 Hz Per Channel on the Micro Pod
Data Logged Up To 100 Hz Per Channel on the Pro units
Optional Upgrade - 1000 Hz Logging (16,000 Hz Sampling) Rate Per Channel (Coming Soon)
Plugs Directly Into Any Micro Pod and Pro Series Wiring Harness
No Calibration Or Special Programming Required
All EGT Measurements Logged And Viewed Directly On Micro Pod or Pro Series Unit

We guarantee it or we will give your money back! *
*See Terms And Conditions Regarding This Offer.