Camera Control
   R.L.C. Racing makes synchroinized video easy! The Track Commander, K-Pod, Micro Pod, or Pro unit connects directly to GoPro*, ChaseCam, and certain Sony and Canon video cameras** and remotely control them. The RLC data logger will control the camera by turning it on and start recording when race dash starts to log data. When the RLC race logger stops logging data it will send a signal to the camera to stop recording and turn off. You will never again have to worry about turning the camera on, draining the battery, or pressing the record button; RLC does it all for you!

Works With GoPro HERO 1080 HD Cameras (With HERO Bus)
Works With ChaseCam Cameras
Works With Sony/Canon Cameras With A Remote Jack Integrated Into AV Remote Terminal
Camera Controlled By RLC Race Logger (On/Off And Start/Stop Recording)
Easy To Synchronize GoPro And Sony/Canon Camera File To A RLC Log File (First Time Only)
Video Embedded With Data On ChaseCam Cameras
Video Directly Corresponds to Data and GPS Track Position

*This feature only works on a GoPro HD HERO and HERO2 (with HERO Bus Port).
** This feature only works with Sony and Canon cameras that have a remote jack integrated into the AV remote terminal. It also requires the purchase of a 10 pin LANC adapter (RLC does not sell this cable).

   The Track Commander, K-Pod, Micro Pod, or Pro unit connects easily to the GoPro, ChaseCa, and Sony/Canon cameras with a simple video adapter cable. The RLC race logger will help to conserve battery life by turning the camera on and off and conserve memory space by starting and stopping recording only when you are out on the track. Now you can concentrate on your driving because everything else is already being taken care of by your RLC data logger.

   Synchronizing the video file to the data file is extremely easy with the Pro Race Analysis software. Since the RLC race logger controls the GoPro or Sony/Canon camera, the two files are already semi-synchronized. Once you synchronize the two files they are saved into one file and you never have to do it again. Now when you click anywhere on the track map the video and data will jump to that exact position. Customers using a ChaseCam camera do not have any manual synchronization to do because the data is already embedded into the video file.

   Below is a demo of a synchronized video file. You can see how the data, GPS track position, and video are truly synchronized and allow you to analyze your data like a true professional.