Processor / CPU:
 520 Mhz Intel 32 Bit XScale RISC Processor
Color Graphics Touch Screen Display:
3.5 in. Sunlight Readable, Transflective TFT Color Graphics Display
Dimmable For Nighttime Use
320x240, 64,000 Colors
Touch Screen For Ease Of Use
Wide Viewing Angle
Firmware And Functionality:
Lap Timer With Best/Last Lap Displays
Predictive and Split Lap Timer
File Management Supports Multiple Track Sessions
Easy To Update/Upgrade Software In The Field Data Logging:
The Chase Commander comes with two (2) Gigabytes of standard on-board nonvolatile FLASH memory to store dozens and dozens of tracks sessions. That could be an entire racing season logged on your Chase Commander unit without writing over any existing file! The GPS and Video data is logged.
Two (2) Gigabytes Standard Data Storage Memory (Factory Expandable)
Programmable Auto Start/Stop Logging Features
Data From GPS Serial Port Logged
Data From Synchronized Video Serial Port Logged
Data From Data Acquisition Channel Expanders (DACX) Logged
Stores Dozens Of Track Sessions With Out the Need To Up Load Data
Auto Time Stamp Of Each Logged Track Session
Upload To USB Host FLASH Drive 10 Mega Bits Per Second
Connectivity:
Downloading the data from the Chase Commander onto a PC is fast! You can use a USB FLASH memory stick with a transfer rate of 2.4 Mb/sec, that's 2.5x faster than our competitors. The serial ports are used for connecting to GPS systems and synchronized video.
USB Host For FLASH Stick / Drive
Two (2) Serial Ports (RS-232) For GPS And Synchronized Video (Logged)
CAN Bus For Adding Data Acquisiton Channel Expanders (DACX) |
